How to Achieve Remote Outdoor Light Switch
Smart lighting, LED bulbs, wireless light switches… those are all great things for inside the home, but can you do
remote outdoor light switch? The answer is, of course, yes. In fact, remote outdoor light switch is not much more complicated than indoor lighting control, and often uses exactly the same devices, but if you want to get a little more creative with your remote outdoor light switch or advanced landscape lighting, then there are some new and interesting products you can use.
Remote outdoor light switch can be done by any of our products. The working distance can reach 100-5000m according to different products. For example, one of our customers want to use 0020114 of our 2000-5000m series for light that has been installed upon the mountain. This remote control kit can reach 5000m in an open ground and it is the best choice for the long range remote outdoor light switch. This remote control kit has feedback function,
with feedback function, remote outdoor light switch will turn on/off when you press on the button of the transmitter. And when remote outdoor light switch is on / off, the RF wireless receiver will immediately send a return signal to the transmitter. After the transmitter receives the feedback signal, it will exude a buzzing sound like “D~” which means remote outdoor light switch has been turned on/off successfully. This feedback function can make the user know whether ha/she has turned on / off remote outdoor light switch in a long distance.
The receiver has waterproof connector and waterproof function, so it can be installed outdoor. We also have waterproof transmitter, they have big button and waterproof function.
First of all, let’s see the preparation for the remote outdoor light switch,
1 x RF wireless receiver 0020112 (S1PXW-DC-ANT2)
1 x DC Light for the remote outdoor light switch
1 x Power Adapter
The wiring for this remote outdoor light switch :
Neutral wire and live wire from the DC light should be respectively connected to Terminal “A” Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.
Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.
Control mode Latched:
Press the big button on the remote controller-> DC light is on;
Press the small button on the remote controller -> DC light is off.
Pair the remote controller to the wireless receiver:
Press button K1 of wireless receiver for 1- 2 seconds; signal LED on thewireless receiver is on. The wireless receiver enters into status of LEARNING.
Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.
Press the big button on the transmitter for this remote outdoor light switch, the DC light is on.
Press the small button on the remote controller for remote outdoor light switch, the DC light is off.
If you want 1000-2000m remote outdoor light switch, 0020469 (S1U-AC220-ANT2) is a good choice for you. The receiver is relay output.
Let’s see the preparation,
1 x RF wireless receiver 0020063 (S2U-DC12)
1 x transmitter CB-2
2 x light bar for the remote outdoor light switch
1 x Power Adapter
Set momentary control: Press and hold -> On; Release -> Off.Operation:
You can also set Toggle control mode or Latched control mode according to the user manual.
Press and hold big button of transmitter: one of the light bar for remote outdoor light switch is on.
Release big button, one of the light bar for remote outdoor light switch is off.
Press and hold small button of transmitter: another light bar for remote outdoor light switch is on.
Press and hold small button of transmitter: another light bar for remote outdoor light switch is off.
If you want other range for the remote outdoor light switch, please visit online shop
没有评论:
发表评论