We are a manufacturer of refrigerated ice storage reach in cases. We are considering an application to remotely unlock the doors using an electric strike. The application would most likely use a remote with a range of less than 150 feet typically. I am interested in getting some information about components that you might have that would work for this application.
Answer:
You can consider use the wireless remote control system according to your requirement. It is model: S1X-DC12-ANT2 & CB-2.The receiver (S1X-DC12-ANT2) is 1 channel and output power is DC6V/9V/12V/24V. The transmitter (CB-2) is suitable for long range remote control and distance is 1000m/3000ft theoretically. After you mount receiver to lock, you can use wireless transmitter to remote control unlock the door.
Here is the circuit diagram of receiver. You can connect lock to “A & B” output terminal of receiver. Then supply power to receiver. You press the button of transmitter and the lock will on or off by wireless remote control.
There are three control modes for the wireless remote control system: toggle, momentary, latched. You can set any one of three modes as the operation:
When you only connect jumper-2, it is toggle mode.
Press big button: Turn on the lock, terminal A&B output DC power.
Press big button again: Turn off the lock, terminal A&B no output.
Press big button again: Turn off the lock, terminal A&B no output.
When you only connect jumper-1, it is momentary mode.
Press and hold big button: Turn on the lock, terminal A&B output DC power.
Release big button: Turn off the lock, terminal A&B no output.
Release big button: Turn off the lock, terminal A&B no output.
When you don’t connect jumper-1 and jumper-2, it is latched mode.
Press big button: Turn on the lock, terminal A&B output DC power.
Press small button: Turn off the lock, terminal A&B no output.
Press small button: Turn off the lock, terminal A&B no output.
By the way, you can also enter into our website and search the wireless remote control system as following:
Model: 0020491 (S1X-DC12-ANT2 & CB-2)
The transmitter: CB-2
The receiver: S1X-DC12-ANT2
Website:
http://www.ourautomation.com/-p-1800.html
没有评论:
发表评论