Remote light Switch

We are looking for a remote light switch kit to remote control light through a hallway at a restaurant. It is meant to signal the server that food is ready in the kitchen. We are looking at the Long Range 2000M 1 CH Momentary Remote Control Kit. This looks like a reliable solution but I have a question… Is there any way of knowing if the light attached the receiver is actually turned on without seeing it. I realize the bulb may blow now and then, but on the whole they need to be sure in the kitchen when they signal the server the light is actually on. We look forward to this solving our problem with one of you products.

We recommend this customer to choose model: 0020104 (S1PUW-DC12-ANT2 & CC-2 or CC-1). According to his description, he wants a remote control kit that has two-way function or feedback function. This model is definitely suitable for him to remote control light at his restaurant.

The long range remote control kit has feedback function which can let the user know whether he/she had already connected the transmitter and receiver successfully in such a long distance. Two ways working mode, when the receiver gets the signal of transmitter, it will immediately send a return signal to the transmitter.

The remote control kit can be used to control both DC0~28V and AC110~240V equipments.

Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals A and B are Normally Open; Terminals A and C are Normally Closed.

If you want to remote control a DC12V light, do as following:

1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.

2) Connect Terminal A to the positive pole of the light, connect Terminal B to the positive pole of the power supply, and connect both light and power supply’s negative pole.

If you want to remote control an AC220V light, do as following:

1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.

2) Connect Terminal A to the light, connect Terminal B to the live wire of the power supply, and connect light and power supply’s neutral wire.

By using this long range remotelight switch  kit , the server of the restaurant can easily know whether the food is ready or not in the kitchen. This will bring a lot of convenience for all the members of the restaurant. In addition, such method may let the customers feel more satisfied because it will shorten their time for waiting their food.

If you have the similar problem like this customer, or in other words, if you want to remote control light, you can enter into our website to choose the remote control kit you like.

Online shop: www.ourautomation.com

2000-5000M Remote Light Switch for CFL Bulb

2000-5000M Remote Light Switch for CFL Bulb

Whether you're reading in the comfort of your bed or setting just the right mood for watching a movie, remote light switch means never having to get up out of your favorite chair to switch ON/OFF your CFL bulb. If you want a remote light switch product to control one(multiple) CFL bulb(s) in a super long range, but still worry about that you may don’t know if the CFL bulb attached the wireless receiver is actually on/off in such a long distance .

We think remote light switch 0020114 (S1PXW-DC12-ANT2 & CC-2) may the choice for you. Because the remote light switch 0020114 can reach 2000, 3000m, 4000m or 5000m in different circumstances. With two-way feedback function, the CFL Bulb will turn on/off when you press on the button of the remote controller. And when the CFL Bulb is on/off, the wireless receiver will immediately send a return signal to the remote controller. After the remote controller receives the feedback signal, it will exude a buzzing sound like “D~” which means CFL Bulb has been turned on/off successfully. The two-way feedback function of remote light switch can make the user know whether ha/she has turned on/off CFL Bulb in such a long distance.

Here is the wiring for a DC CFL bulb with the remote light switch 0020114.

Let’s see the material preparation:

1 x wireless receiver S1PXW-DC12V-ANT2

1 x remote controller CC-2

1 x DC 12V power adapter

1 x DC CFL bulb

Neutral wire and live wire from the DC CFL bulb should be respectively connected to Terminal “A” Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.

Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.

Control mode Latched:

Press the big button on the remote controller-> CFL bulb is on;

Press the small button on the remote controller -> CFL bulb is off.

Pair the remote controller to the wireless receiver:

Press button K1 of wireless receiver for 1- 2 seconds; signal LED on the wireless receiver is on. The wireless receiver enters into status of LEARNING.

Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.

 

Press the big button on the remote controller, the CFL bulb is on.

 

Press the small button on the remote controller, the CFL bulb is off.

 

If you are intereated in our remote light switch products, please enter into the site:

http://www.ourautomation.com

2000-5000M Remote Light Switch for Light Bar

Whether you’re reading in the comfort of your bed or setting just the right mood for watching a movie, remote light switch means never having to get up out of your favorite chair to switch ON/OFF your CFL bulb. If you want a remote light switch product to control one(multiple) light bar(s) in a super long range, but still worry about that you may don’t know if the light bar attached the wireless receiver is actually on/off in such a long distance .

We think remote light switch 0020114 (S1PXW-DC12-ANT2 & CC-2) may the choice for you. Because the remote light switch 0020114 can reach 2000, 3000m, 4000m or 5000m in different circumstances. With two-way feedback function, the light bar will turn on/off when you press on the button of the remote controller. And when the light bar is on/off, the wireless receiver will immediately send a return signal to the remote controller. After the remote controller receives the feedback signal, it will exude a buzzing sound like “D~” which means light bar has been turned on/off successfully. The two-way feedback function of remote light switch can make the user know whether ha/she has turned on/off light bar in such a long distance.

Here is the wiring for a light bar with the remote light switch 0020114.

Let’s see the material preparation:

1 x wireless receiver S1PXW-DC12V-ANT2

1 x remote controller CC-2

1 x DC 12V power adapter

1 x DC light bar

Neutral wire and live wire from the light bar should be respectively connected to Terminal “A” Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.

Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.

Control mode Latched:

Press the big button on the remote controller-> light bar is on;

Press the small button on the remote controller -> light bar is off.

Pair the remote controller to the wireless receiver:

Press button K1 of wireless receiver for 1- 2 seconds; signal LED on thewireless receiver is on. The wireless receiver enters into status of LEARNING.

Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.

Press the big button on the remote controller, the light bar is on.

Press the small button on the remote controller, the light bar is off.

If you are intereated in our remote light switch products, please enter into the site:

http://www.ourautomation.com

How to automatically control two AC lamps in Long Range (5000m)

We use a new long range automatic control system to control two AC lamps. This system contains one receiver, one transmitter and magnetic sucker antenna.

Here is the automatic control kit:

The automatic remote control kit can be used in agriculture automation, industry automation, and home automation, such as security system, remote control lights, motors, doors/ locks/ windows/ blinds/ cars and various equipments. The working distance of automatic remote control kit is between 1000m and 5000m. The remote control kit has waterproof case with waterproof connectors. The receiver can be installed outdoors. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.

Firstly we prepare:

1 x 2 channel long range (5000m), high power receiver with Magnetic Sucker Antenna (S2PUW-DC12-ANT2)

1 x 2-button transmitter (CC-2)

2 x DC12v power supply

1 x power adapter

2 x AC lamps

Some lines

Secondly, see the wiring images below; B is normally open terminal; C normally closed terminal and A is common terminal. Connect power to terminal “+” and “-“. Connect two AC lamps to two terminals “A”

Here is the circuit diagram:

Thirdly, it comes to operation

(1) Setting the receiver as Toggle control mode: turn on the first bit of the dip switch.

Control mode Toggle: Press -> On; Press again -> Off.

(2) Setting feedback function: Turn on the third bit of the dip switch.

(3) Press the big button of the transmitter: Relay 1 turns on (connect A and B, disconnect A and C), the lamp 1 is on.

At the same time, the transmitter exudes a buzzing sound like “D~” which means the lamp 1 is on.

Press the big button again: Relay 1 turns off (disconnect A and B, connect A and C), the lamp 1 is off.

(4) Press the small button of the transmitter: Relay 2 turns on (connect A and B, disconnect A and C), the lamp 2 is on.

At the same time, the transmitter exudes a buzzing sound like “D~” which means the lamp 2 is on.

Press the small button again: Relay 2 turns off (disconnect A and B, connect A and C), the lamp 2 is off.